6LoWPan Arduino Shield

An Arduino Uno shield with the Avior modem on it. Now you can quickly start your applications.
The modem on the Shield PCB is connected to the Arduino processor. This can tell it to make a connection or to broadcast information. Easy to use AT-commands are used to control the modem over a (soft-)UART. This makes for a fast implementation and poses little overhead. The UART is complemented with Flow control on character and block basis.

Do you have an application in mind?
Contact us at ☎ +31(0)852733462.

Arduino and Avior modem

You connect the modem to your application processor (like an Arduino) and tell it to make a connection, or to broadcast information. Easy to use AT-commands are used to control the modem over a UART. This makes for a fast implementation and poses little overhead. The UART is complemented with Flow control on character and block basis.

Supported protocols are: CoAP, UDP and TFTP.

Example source code is available to run a Coab based sensor application.